Searah Muara Bakau - Mechanical Specialist

SKK Migas · Kalimantan Timur (Indonesia)

Lamar

Sekilas tentang pekerjaan ini

SKK Migas membuka posisi Mechanical Specialist untuk memastikan keandalan operasi dan pemeliharaan peralatan mekanis di offshore/FPSO. Posisi ini ditujukan bagi kandidat dengan pengalaman minimal 5 tahun di industri Oil & Gas, berlokasi offshore secara rotasi di Kalimantan Timur.

Tugas utama

  • Memastikan peralatan mekanis offshore/FPSO beroperasi dan dirawat dengan aman
  • Mengoordinasikan pemeliharaan, inspeksi, pengujian, dan kontraktor mekanis
  • Menyusun prosedur pemeliharaan serta menyiapkan pekerjaan untuk pelaksanaan
  • Mencatat riwayat peralatan dan perubahan dokumen dalam CMMS
  • Berpartisipasi dalam analisis akar masalah kegagalan peralatan

Kualifikasi utama

  • Sarjana Teknik Mesin atau bidang serupa
  • Minimal 5 tahun pengalaman di industri Oil & Gas
  • Berpengalaman menangani gas turbine, compressor, peralatan berputar, dan pedestal crane
  • Mahir menggunakan CMMS; pengalaman SAP diutamakan
  • Fasih berbahasa Inggris dan Bahasa Indonesia

Ringkasan ini dibuat dengan AI dari deskripsi di bawah. Yang berlaku adalah deskripsi lengkapnya di situs SKK Migas.

Deskripsi pekerjaan

Purpose

  • The
  • Mechanical Specialist is responsible for ensuring the reliable operation and
  • maintenance of all mechanical equipment on Offshore/FPSO. This includes
  • troubleshooting, repairing, and overhauling various systems such as pumps,
  • compressors, turbines, and others rotating and static equipment. Also play as
  • key role in developing and implementing preventative maintenance programs and
  • optimizing equipment performance.

The

Mechanical Specialist is guaranteeing the prompt, safe and environment

respecting execution of Maintenance activities will be conducted in safe

manner with maximizing uptime and field production efficiency while

minimizing the total maintenance cost (production downtime, spare parts,

manpower, etc.) and meet daily production targets whilst complying with

company guidelines and legal requirements to deliver highest value to

stakeholders without compromise to Safe Operating Principals.

General

Accountabilities and Responsibilities

  • Ensure all relevant Mechanical equipment is fully operational, in service, maintained safely, effectively and in accordance with procedures and equipment design codes and standards.
  • Ensure maintenance activities are carried out in compliance with all relevant procedures and legal requirements.
  • Ensure that all Safety Critical element PM’s are completed with plan.
  • Ensure all work is coordinated and aligned with production priorities and within the issued job plan and schedules, including reporting by the scheduler from the CMMS.
  • Liaise with Planner and Scheduler regarding the forward planning of spare parts deliverability and in determining min/max stock levels of spare parts and maintenance consumables on the facility.
  • Assist in preparation and surveillance of annual maintenance team budget.
  • Maintain complete and accurate equipment history records within the CMMS,

Computerized Maintenance Management System, preferable SAP system.

  • Apply the lessons learned from design reviews, receiving inspections, and risk management findings and support team performance by sharing knowledge and best practices.
  • Conduct and coordinate Mechanical maintenance contractors, inspections, calibrations, function tests and evaluate Mechanical equipment operation and condition to determine remedial action.
  • Prepare maintenance activities for flawless execution. Ensuring permits, PPE, tools, materials, equipment, work site preparation, and toolbox talks are in place and always completed.
  • Develop equipment Standard Maintenance/Repair Procedures and guidelines for all

FPU/FPSO equipment.

  • Support safe start-up and shutdown of process facilities
  • Manage relevant reporting and administration work based on the needs of the respective organization (including data recording, correspondence, etc.
  • based on the function of this position).
  • Produce comprehensive and accurate shift and crew change handover notes.
  • Ensure that any changes to Mechanical controlled documentation, because of MOC

(Management of Change) work, are captured and correctly recorded.

  • If required, attend Emergency work after normal working hours on a callout basis.
  • Participate in Root Cause Analysis for equipment failures.
  • Apply the lesson learned from design review, receiving inspections, and risk management finding and support team performance by sharing knowledge and best practices.
  • Maintain complete and accurate equipment history records within the Computerized

Maintenance Management System.

  • Manage relevant reporting and administration work based on the needs of the respective organization (including data recording, correspondence, etc – based on the functions of this positions).
  • Ensure the confidentiality of the company’s documentation.

Health, Safety, Environment and Quality (HSEQ)

  • Comply with rules and standards described in Company Policies, HSE Integrated

Management System and Procedures

  • Report all incidents
  • Motivate staff and colleagues to comply with HSE rules and standards
  • Participate in HSE related initiatives

Qualifications & Experience

  • Education: Bachelor’s degree in mechanical engineering or similar
  • Experience:
  • Minimum 5 years of Oil & Gas Industry experience.
  • Fluent with CMMS System, preferable SAP Experience.
  • Familiar with Predictive Maintenance data acquisition, such as tribology.
  • Extensive experience handle Gas Turbine Generator,

Gas Turbine Compressors, rotating equipment, and pedestal crane.

  • Training and Certification:
  • Employee

Induction including HSE Awareness

  • T-BOSIET

(1st time) or T-FOET (refreshment)

  • Advance Fire

Fighting

  • CSEA

(Confined Spaces Entrant Attendant)

  • BNSP-certified candidates are highly preferred
  • Language: Fluent in English and Bahasa Indonesia

Technical Competencies

  • Extensive experience and exposure with variety of Mechanical rotating and static equipment and manufacturers.
  • Good knowledge of production facilities in an oil/gas including installation, repair testing and maintenance of wide range of Mechanical systems.
  • Must have the ability to read and understand drawings and specifications specific to

Mechanical discipline, e.g. P&ID, vendor control drawings, etc.

  • Extensive experience and exposure with hazardous areas and hazardous area equipment certification.
  • Extensive experience and exposure with standard operating practice with respect to maintenance activities in an operational Oil & Gas production/processing environment, with specific regard to hazardous area practise and restrictions.
  • Extensive experience and exposure with Maintenance Management system CMMS-SAP.
  • Extensive experience and exposure with hazard associate with Manual handling and operation maintenance requirements of fixed and mobile lifting equipment, including offshore cranes and inspection requirements under design code API

2C.

  • Extensive experience and exposure with maintenance requirements and hazards of high-pressure piping systems, valve types, and flange management.
  • Extensive experience and exposure with levelling and alignment rotating equipment.
  • Extensive experience and exposure with operation and maintenance of industrial single

& dual fuel Gas Turbines and the installation and removal of compressor

dry gas seals.

  • Extensive experience and exposure with operation and maintenance of HVAC systems.
  • Extensive experience and exposure with operation and maintenance of centrifugal compressors, centrifugal pumps, air compressors and dryers, fin fan air coolers, pedestal cranes, diesel engine drivers, and utility packages.
  • Extensive experience and exposure with use of hydraulic and pneumatic bolt torque and tensioning equipment.
  • Extensive experience and exposure with standard operating practice with respect to maintenance activities in an operational oil & gas production/processing environment, with specific regard to hazardous area practices and restrictions.
  • Extensive experience and exposure to root cause analysis and troubleshooting of operational equipment with state-of-the-art diagnostic techniques.

Non-Technical

Competencies

  • Integrity & values
  • Driving for results
  • Value Creation Focus
  • Teamwork & cooperation
  • Initiative
  • Analytical thinking
  • Information seeking
  • Concern for order
  • Self-confidence
  • Team player

Working Conditions

Offshore based – Rotational (FPSO)

Lowongan ini diambil dari situs karier resmi SKK Migas. Lokr tidak memproses lamaran: kamu melamar langsung di situs perusahaan, dan info terbaru tentang lowongan ini ada di sana.

Lowongan lain di SKK Migas

Lowongan Manufaktur di perusahaan lain