Engineer, Pre-com & commissioning – GEP & SURF
Mubadala Energy · Jakarta, Jakarta, Indonesia
Sekilas tentang pekerjaan ini
Mubadala Energy membuka posisi Engineer, Pre-com & commissioning – GEP & SURF sebagai kontraktor pihak ketiga di Jakarta. Posisi ini bertanggung jawab menyiapkan sistem subsea untuk startup dan operasi, bagi kandidat dengan pengalaman minimal 10 tahun dalam commissioning subsea oil & gas dan proyek deepwater.
Tugas utama
- Menyusun prosedur dan merencanakan commissioning sistem subsea.
- Melaksanakan pembersihan, pigging, gauging, dan hydrotest pipeline.
- Mengawasi dewatering, pengeringan, leak test, dan nitrogen purging.
- Mengawasi kontraktor serta vendor dalam pelaksanaan offshore.
- Menyiapkan dokumentasi dan serah terima sistem kepada tim operasi.
Kualifikasi utama
- Sarjana atau magister Teknik Mesin, Offshore/Ocean, Perminyakan, atau Sipil.
- Minimal 10 tahun pengalaman commissioning sistem subsea di oil & gas.
- Minimal 10 tahun pengalaman dalam proyek deepwater.
- Memahami arsitektur subsea, operasi pigging, dan standar hydrotesting.
- Menguasai SNI, DNV-ST-N001, API, serta standar internasional oil & gas.
Ringkasan ini dibuat dengan AI dari deskripsi di bawah. Yang berlaku adalah deskripsi lengkapnya di situs Mubadala Energy.
Deskripsi pekerjaan
Engineer, Pre-com & commissioning – GEP & SURF
(Third Party Contractor)
Jakarta, Indonesia
Role Purpose
A Pre-commissioning & Commissioning Engineer is responsible for planning, coordinating, and executing all activities required to prepare a subsea system for safe startup and operation. This includes mechanical completion verification, testing, cleaning, and system handover to operations.
Responsibilities include but are not limited to the following:
- Engineering & Planning
- Develop/review pre-commissioning and commissioning procedures for subsea systems (Gas Export Pipeline, Flowlines, Subsea Xmas Trees, PLETs, manifolds, umbilicals)
- Review design documents (P&IDs, Isometrics, alignment sheets, datasheets).
- Define method statements for:
- Flooding, cleaning, gauging
- Hydrostatic testing
- Dewatering and drying
- Prepare commissioning dossiers and system boundaries.
- Pre-commissioning Activities
Plan/Execute/supervise/monitor/manage
- Pipeline/Flowline cleaning (pigging, flushing)
- Gauging to confirm internal diameter integrity
- Hydrotest (strength & leak test)
- Test water sourcing, treatment, and disposal
- Chemical dosing (corrosion inhibitor, oxygen scavenger)
- Ensure compliance with specifications and codes (e.g., SNI, DNV, API).
- Dewatering & Drying
Plan/Execute/supervise/monitor/manage
- Dewatering using air or nitrogen pigging
- Drying to required dew point (e.g., -20°C or lower depending spec)
- Moisture content
- Dew point measurement
- Prepare pipeline for hydrocarbon introduction.
- Commissioning Activities
Plan/Execute/supervise/monitor/manage
- Leak testing
- Nitrogen purging / inerting
- Final system reinstatement
Interface with
- Topside / FPSO / onshore facilities
- Support first hydrocarbon introduction.
- Offshore Execution
Work onboard
- Lay vessels
- Construction vessels
- FPSO
- Supervise subcontractors and vendors.
- Ensure execution aligns with project schedule and safety standards.
- Documentation & Handover
Prepare
- Test reports
- Punch lists
- System completion certificates (RFSU / RFO)
- Compile commissioning dossiers for handover to operations team.
- Ensure all QA/QC documentation is complete and approved.
- HSSE Compliance
Implement HSSE procedures during all activities.
Conduct
- Risk assessments (HAZID, JSA)
- Toolbox talks
- Ensure safe handling of:
- High-pressure systems
- Chemicals
- Nitrogen operations
Qualifications
- Bachelor's/Master degree in:
- Mechanical Engineering
- Offshore / Ocean Engineering
- Petroleum Engineering
- Civil Engineering
Experience
- Minimum 10 yrs solid experience years in pre-commissioning & commissioning of subsea system in oil & gas.
- Minimum 10 yrs solid experience in deepwater projects.
Knowledge & Skills
- Strong knowledge of:
- Subsea architecture (Gas Export Pipeline, Flowlines, Subsea Xmas Trees, PLETs, manifolds, umbilicals) & materials
- Pigging operations
- Hydrotesting standards
- Familiar with codes:
- SNI
- DNV-ST-N001
- API standards
- Other Oil & Gas international standards
Soft Skills
- Strong coordination & leadership offshore
- Problem-solving under pressure
- Effective communication with multi-disciplinary teams
If you are interested in joining our team, click 'Apply for Position' on this webpage.
DISCLAIMER
Please be aware that Mubadala Energy will never request payment during the hiring process. Legitimate job openings can be found on our official website or through our job portal at https://www.careers-page.com/mubadalaenergy
All official communications will originate from an @mubadalaenergy.com email address, so please verify the identity of any recruiters you may encounter.
Mubadala Energy is not responsible for any losses incurred due to recruitment scams. Stay vigilant and protect yourself from job scammers.
By applying for this position at Mubadala Energy, you expressly consent to the collection, use, and sharing of your personal information for recruitment and employment purposes in accordance with the Mubadala Energy Data Privacy Policy and the country‑specific Personal Data Protection Act.