Design Engineer: Aerodynamics & Flight Sciences

PT Smart Cakrawala Aviation · Jakarta, Indonesia

Lamar

Sekilas tentang pekerjaan ini

PT Smart Cakrawala Aviation mencari Design Engineer: Aerodynamics & Flight Sciences untuk tim Design Organisation Approval (DOA) Class C yang menangani pesawat kecil. Peran ini memimpin pekerjaan aerodinamika untuk modifikasi pesawat, termasuk analisis beban, performa, dan kepatuhan kelaikudaraan. Posisi berlokasi di Jakarta, Indonesia; pengalaman 1–3 tahun dicari, dan lulusan baru dengan portofolio relevan juga dapat melamar.

Tugas utama

  • Menghitung gaya aerodinamis pada modifikasi eksternal pesawat dan menyerahkan bebannya kepada tim struktur.
  • Memperkirakan dampak hambatan pada performa pesawat dan menyusun AFMS atau POH Supplements.
  • Menilai dampak perubahan aerodinamika terhadap stabilitas, trim, dan aliran udara.
  • Menyiapkan laporan teknis dan bukti kepatuhan untuk persetujuan kelaikudaraan.
  • Menyusun persyaratan serta prosedur uji terbang bersama pilot operasional.

Kualifikasi utama

  • S1 Teknik Dirgantara, Aeronautika, atau Mesin dari universitas terakreditasi.
  • Pengalaman 1–3 tahun di aerodinamika atau modifikasi pesawat; lulusan baru dengan portofolio relevan juga dipersilakan.
  • Memahami aerodinamika terapan dan mampu memperkirakan beban serta perubahan performa pesawat.
  • Menguasai metode seperti DATCOM, Hoerner, OpenVSP, atau VSPAERO.
  • Memahami CASR Part 23 Subpart B dan prosedur perubahan desain CASR Part 21; mampu menulis laporan dalam Bahasa Indonesia dan Inggris.

Ringkasan ini dibuat dengan AI dari deskripsi di bawah. Yang berlaku adalah deskripsi lengkapnya di situs PT Smart Cakrawala Aviation.

Deskripsi pekerjaan

PT. Smart Cakrawala Aviation is looking for a Design Engineer in Aerodynamics & Flight Sciences to join our Design Organisation Approval (DOA) Class C team for small aircraft (CASR Part 21 / Part 23), within the Office of Airworthiness / Design Engineering Department.

In this role you will be the lead engineer for the aerodynamic side of aircraft modifications: producing design data, estimating aerodynamic loads for the structures team, evaluating how external installations affect performance, stability, and handling, and preparing the compliance evidence needed for airworthiness approval.

Responsibilities

  • Calculate lift, drag, and aerodynamic moments on external modifications (sensor pods, cameras, dispenser funnels, antennas, fairings) across the critical speed envelope (VA, VC, VNE/VD), and pass the resulting loads to the CVE / DE Structures as the basis for structural substantiation.
  • Estimate drag penalties and their effect on aircraft performance (rate of climb, take-off and landing limits, fuel consumption), and draft Aircraft Flight Manual Supplements (AFMS) or POH Supplements.
  • Assess the qualitative impact of aerodynamic changes on static stability, trim characteristics, and possible buffet or airflow disturbance on the tail and control surfaces.
  • Prepare Engineering Reports, Compliance Statements, and technical justification showing compliance with CASR Part 23, in particular Subpart B (Flight Requirements) and CASR 23.831 (ventilation, contamination-free airflow).
  • Develop qualitative Flight Test Requirements and Procedures together with operational pilots to verify flight characteristics and the function of each modification.

Requirements

  • Bachelor's degree (S1) in Aerospace / Aeronautical Engineering or Mechanical Engineering from an accredited university. A Master's degree (S2) in Aerospace Engineering specialising in aerodynamics, flight mechanics, or thermofluids is preferred.
  • 1 to 3 years of experience in aircraft aerodynamics or aircraft modification, for example in the aerospace industry, a modification facility, MRO engineering, or an aerodynamics research institution.
  • Fresh graduates with a relevant thesis or an aerodynamic / aircraft performance analysis portfolio are welcome to apply and will work under supervision.
  • Solid grasp of applied aerodynamics: fluid flow theory, airfoil and 3D wing characteristics, drag build-up analysis, and force estimation across angles of attack and sideslip.
  • Able to extract aerodynamic loads (lift, drag, side force, moments) on external components for hand-over to the structures team.
  • Able to calculate performance changes (take-off, climb gradient, cruise, landing) caused by added parasite / form drag.
  • Proficient with semi-empirical and rapid methods (DATCOM, Hoerner Fluid-Dynamic Drag correlations) or panel method / vortex lattice tools (OpenVSP / VSPAERO).
  • Familiar with CASR Part 23 Subpart B (controllability, trim, stability, stalls, performance) and CASR Part 21 design change procedures.
  • Able to communicate technically and write engineering reports in both Bahasa Indonesia and English.

Good to Have

  • Hands-on experience with aircraft modification, civil airworthiness certification (CASR/FAR Part 23 or Part 25), or qualitative flight testing.
  • 3D CFD experience with OpenFOAM, ANSYS Fluent, or STAR-CCM+ for complex flow visualisation and separation / wake verification.
  • Scientific programming in Python, GNU Octave, or MATLAB to automate aerodynamic calculations.
  • Experience modelling 6-DOF flight dynamics for dynamic control response analysis.

Competencies

Applied Aerodynamics | Aero-Loads | Aircraft Performance & AFM | CASR Part 23 / Part 21 | Semi-Empirical Methods | CFD & Scripting | Technical Reporting

Lowongan ini diambil dari situs karier resmi PT Smart Cakrawala Aviation. Lokr tidak memproses lamaran: kamu melamar langsung di situs perusahaan, dan info terbaru tentang lowongan ini ada di sana.

Lowongan lain di PT Smart Cakrawala Aviation

Lowongan Manufaktur di perusahaan lain